NEC Univerge sv8500 Manual page 1168

Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
10. SET LAN_ERROR_CHECK
Assign the interval to detect LAN cable fall-off
MG-BRI(SIP)> SET LAN_ERROR_CHECK P1
LAN Error Check Timer setting succeeded.
In order to make a setup reflect. re-starting is
required after saving a configuration data
by SAVE command.
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
11. SET ONE_TIME_PASS
Assign the one time password to be used for the first registration after connected to network.
SET ONE_TIME_PASS P1
MG-BRI(SIP)>
One time password setting succeeded.
In order to make a setup reflect. re-starting is
required after saving a configuration data
by SAVE command.
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
Assigned One Time Password is deleted from the configuration setting when the first registration is com-
Note:
pleted.
12. SET OWN_IPADDRESS
Assignment of IP Address, Subnet Mask, and Host Name of MG(BRI) itself.
MG-BRI(SIP)> SET OWN_IPADDRESS P1 P2 P3
VOL.2-915
MG(BRI) [SCA-2BRIA/MG-2BRIA]
P1: Specify Time (milli-second)
(10 milli-second interval)
Effective ran
ge: 100-1000 in 10-msec
)
step (default: 1000
The result is shown.
P1: Enter any password in 4~10 charac-
ters.
(available characters are 0-9, *, # only)
The result is shown.
P1: Assign the IP Address of
MG(BRI).
(Default: 0.0.0.0)
P2: Assign the Subnet Mask of
MG(BRI).
(Default: 0.0.0.0)
P3: Assign the MG(BRI)'s host name in
full-domain, up to 63-byte of characters, .
(period) and - (hyphen) is available.
(Default: blank)