NEC Univerge sv8500 Manual page 1129

SIP Server Host Name set
Assign the host name of SIP server.
--- SIP Server Host Name set ---
Current SIP Server and Host Name:
SIP Server Host Name
1 blank
2 blank
3 blank
4 blank
5 blank
6 blank
7 blank
8 blank
9 blank
10 blank
11 blank
12 blank
13 blank
14 blank
15 blank
16 blank
17 blank
18 blank
19 blank
20 blank
Change SIP Server Information? [Y (change)/N (cur-
rent)/Q(quit)]: y
Input new SIP Server (1-20): 1
Is there the Host Name? [Y/N]: y
Input new Host Name: SVR1.nec.com
Continue? [Y (continue)/N (exit)]: n
SIP server refers to the Telephony Server.
Note 1:
Ethernet Speed set
Assign the LAN interface data.
--- Ethernet Speed set ---
Note 1
Current data setting is displayed.
Asked whether to change the displayed data.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Enter the SIP server number.
Asked whether to use host name.
Y: Use host name
N: Not use host name
Enter the SIP server's host name in full-domain. (up to
63-byte of characters, . (period) and - (hyphen) is avail-
able)
Asked whether to continue this command setting.
Y: Continue this command to set other SIP server
data
N: Go on to the next command
VOL.2-876
MG(BRI) [SCA-2BRIA/MG-2BRIA]