NEC Univerge sv8500 Manual page 1142

4. SET DNS_SV
Assign whether to use DNS server or not.
MG-BRI>set dns_sv
DNS Interface [E(enable)/D(disable)]: e
Default configuration is 'DISABLE',
if you will not change a configuration by using this command.
In order to make a setup reflect and keep, re-starting is
required after saving a configuration data by SAVE command.
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
5. SET FAX_DETECTION_TIME
Assign the effective switching timer for FAX
MG-BRI > set fax_detection_time
Input (0/1-5/6-9): 1
Default configuration is '1',
if you will not change a configuration by using this command.
In order to make a setup reflect and keep, re-starting is
required after saving a configuration data by SAVE command.
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
6. SET HC_RCV_TIMER
Assign the Time-out value for Telephony Server health check waiting process.
MG-BRI > set hc_rcv_timer
Health-Check Receive Timer (120-300/30): 150
Default configuration is '150',
if you will not change a configuration by using this command.
In order to make a setup reflect and keep, re-starting is
required after saving a configuration data by SAVE command.
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
VOL.2-889
MG(BRI) [SCA-2BRIA/MG-2BRIA]
DISABLE: Not using DNS server
ENABLE: Using DNS server
(default: DISABLE)
0: No switching to FAX
1-5: Effective switching timer (minute)
(Default: 1 minute)
6-9: Switching always effective
Effective range: 120-300 in 30-sec-
ond step (default: 150 seconds)