NEC Univerge sv8500 Manual page 1004

11.6.5 Cable Connection
Connect MG-BRI to the LAN. Insert LAN cable into the "Ethernet" connector lo-
STEP 1
cated in backside of the MG-BRI. "ON LINE" Lamp in front side of MG-BRI will ignite in
green few minutes later when all process has succeeded.
EMA TEL
LINE 0
LAN Cable
Connect ISDN line to MG-BRI. Insert LINE cable of DSU into the "LINE 0" and "LINE 1" located in
STEP 2
backside of the MG-BRI. Confirm that "D" Lamp in front side of MG-BRI flashes
all process has succeeded.
<Connection of ISDN Line>
EMA TEL
LINE 0
LAN Cable
Backside
LINE 1 Ether RS-232C RESET MUSIC
Backside
LINE 1 Ether RS-232C RESET MUSIC
VOL.2-751
ON LINE
Power Cable
External Maintenance
Terminal (PC)
<Confirm the light of D[ch] Lamp>
Frontside
Power Cable
External Maintenance
Terminal (PC)
MG-BRI
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
ON
POWER LINE 0
LINE
B D
Frontside
→ steady lights in green when
D [ch] Lamp
ON
POWER LINE 0
LINE
B D