NEC Univerge sv8500 Manual page 1114

Sub-command
22 VLAN
23 WARNING_TONE_CONTROL
SHOW: Command to display the configuration data
Sub-command
1 CALL_HOLD
2 CONFIG
3 DEFAULT_GATEWAY
4 DHCP_SV
5 DNS_IPADDRESS
6 DNS_SV
7 DTMF_IN
8 FAX_DETECTION_TIME
9 HC_RCV_TIMER
10 INTERFACE
11 LAN_ERROR_CHECK
12 ONE_TIME_PASS
13 OWN_IPADDRESS
14 RTP_START_PORT_NO
15 RTP_STOP_DETECT
16 SIGNALING_PORT_NO
17 SIGNALING_QOS
18 SIP_MADDR
19 SIP_RPORT
20 SIPSV_IPADDRESS
21 SMOOTH_PAD
22 SUBSCRIBE_RETRY
23 VLAN
Assign the Tag VLAN information.
Assign whether to use warning tone when LAN failure or not.
Display the current setting of MG Based Call Retention.
Displays the list of current configuration data.
Displays the current setting of Default Gateway.
Displays the current setting of DHCP server.
Displays the current IP address setting of DNS server.
Displays the current setting of DNS server.
Display the current setting of DTMF relay of in-band signaling.
Displays the current setting of effective timer for FAX switching.
Displays the current setting of Time-out timer for SIP server health
check packet waiting process.
Displays the current setting for speed and activation mode of Ether-
net controller.
Displays the interval to detect LAN cable fall-off.
Displays the current setting of one time password.
Displays the current setting of IP Address, Subnet Mask, and Host
Name of MG(BRI) itself.
Displays the current setting of RTP Start Port Number.
Displays the current setting of RTP Stop Detect Timer.
Displays the current setting of Signaling Port number
Displays the current setting of QoS data for signaling session.
Displays the current setting of SIP maddr.
Displays the current setting of SIP rport.
Displays the current setting of SIP server's IP address, port number,
and host name.
Displays the current Smooth PAD mode.
Displays the current setting of regeneration mode for SIP SUB-
SCRIBE session.
Displays the current VLAN setting.
VOL.2-861
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Function
Function