NEC Univerge sv8500 Manual page 1039

11.7.7 Error Message
Error Message will be displayed to force you to execute the re-registration when error has occurred during
the use of configuration command.
Message
File not found on the TFTP server.
Command not found.
Invalid parameter.
IP address form is incorrect.
VLAN ID is no more registered.
Sub command is missing.
Invalid parameter value.
Invalid sub command.
Command is abnormally terminated.
Parameter(s) are missing.
Entered VLAN ID is already registered.
Entered VLAN ID is not registered.
Meaning
Download file of System Data cannot be found on TFTP Server.
Something other than supported command was entered during command
entry.
Illegal parameter was entered while command entry.
Input format of IP Address is invalid.
Assignment cannot be executed. Exceeding the maximum number of
VLAN ID.
Sub-command was not entered during command entry.
The range of parameter value entered is invalid.
Entered Sub-command is invalid.
Command has terminated abnormally.
Parameter was not entered during command entry.
Specified VALN ID has already been assigned.
Specified VLAN ID is not assigned.
VOL.2-786
MG-BRI