NEC Univerge sv8500 Manual page 1132

Fp85-110 s7
Hide thumbs Also See for Univerge sv8500:
Table of Contents

Advertisement

When I: IP Precedence is selected:
QoS [I (IP PRECEDENCE)/D (DIFFSERV): IP PRECEDENCE]:i
PRECEDENCE(0-7: 6):6
DELAY(0/1): 0
THROUGHPUT(0/1: 0):0
RELIABILITY(0/1: 0):0
COST(0/1:0):0
The result of data setting is shown in a 1-byte (hexadecimal) format in accordance with the setting dialog
Note:
followed by the prompt. The meaning of 1-byte data is shown below:
Prec.
When D: DIFFSERV is selected:
QoS [I (IP PRECEDENCE)/D (DIFFSERV): IP PRECEDENCE]:d
DSCP (0-63: 48): 48
The result of data setting is shown in a 1-byte (hexadecimal) format in accordance with the setting dialog
Note:
followed by the prompt. The meaning of 1-byte data is shown below:
DSCP
D T R C
Precedence in IP network (0-7) (6: Default)
Precedence of Low Delay in IP network
0: Not specified (Default)
1: Specified
Precedence of Throughput in IP network
0: Not specified (Default)
1: Specified
Precedence of Reliability in IP network
0: Not specified (Default)
1: Specified
Precedence of Lower Cost in IP network
0: Not specified (Default)
1: Specified
Prec.=PRECEDENCE (3 bits)
D=Delay
T=Throughput
R=Reliability
C=Cost
Enter DSCP value (0-63)
(Default: 48)
DSCP = Differentiated Service Code Point (6 bits)
VOL.2-879
MG(BRI) [SCA-2BRIA/MG-2BRIA]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents