NEC Univerge sv8500 Manual page 1249

Δ
17. SHOW TCS_COMMON1
This command is used to display the common settings 1 for trunk.
MG-PRI > SHOW TCS_COMMON1
value is 0x0215
Remote Alarm Sending
Signal All
Idle Code Sending
Dch Back-up
Layer 1 Alarm Sending
Haul Mode
EC NLP Control
EC NLP Mode
EC 2100Hz Detect
Music Int/Ext
Music No.
Clock Mode
Layer1 Alarm Display
The current setting is displayed.
- Remote Alarm Sending (0/1=Enable/Disable)
- Signal All 01(0/1=Disable/Enable)
:0
:0
- Idle Code Sending (0/1=Disable/Enable)
:0
- Dch Back-up (0/1=Disable/Enable)
:0
- Layer 1 Alarm Sending (0/1=Enable/Disable)
:0
- Haul Mode (0/1=Short/Long)
:0
- EC NLP Control (0/1=Disable/Enable)
:1
- Disable/Enable EC NLP Mode
:0
(0/1=Background Noise/Fixed Level)
:0
:0
- Disable/Enable EC 2100Hz Detect
:5
(0/1=Disable/Enable)
:0
- Select Music Source (0/1=Internal/External)
:1
- Music No. (0=Fur Elise/1=Maiden's prayer/5=Minuet)
- Clock mode (0/1=Secondary/Primary)
- Layer 1 Alarm LED display (0/1=Enable/Disable)
VOL.2-996
MG-PRI/PRA