NEC Univerge sv8500 Manual page 1027

9. SET OWN_IPADDRESSÅFAssignment of IP Address and Subnet Mask of MG-BRI itself.
Assignment of IP Address and Subnet Mask of MG-BRI itself.
MG-BRI>set own_ipaddress
OWN IP address: 10.41.1.100
Subnet mask: 255.255.255.0
Assign the IP Address, then Subnet Mask.
Note:
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
10. SET SIGNALING_PORT_NO
Assign the port number to be used for signaling toward PHI.
MG-BRI>set signaling_port_no P1
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
11. SET SIGNALING_QOS
Session.
Assign the ToS value towards signaling (DRS) and H.245 Ready Packet Session.
• When P1 and P2 is specified
MG-BRI>set signaling_qos P1 P2
:
Assignment of number of Signaling port.
:
Assignment of ToS value towards signaling (DRS) and H.245 Ready Packet
VOL.2-774
Assign the IP Address of MG-BRI.
(Default: 0.0.0.0)
Assign the Subnet Mask of MG-BRI.
(Default: 0.0.0.0)
P1: Port number (1024-65534)
(Default: 64000)
P1: I/D/C
I: Directly assign the IP Precedence type data
D: Directly assign the DIFFSERV type data
C: Clear the setting of QoS
P2: 0x00-xFF/0-63
0x00-0xFF: Effective only when "1" was selected for P1
0-63: Effective only when "D" was selected for P1
MG-BRI