NEC Univerge sv8500 Manual page 1052

4. Port Numbers
The table below provides information about the port numbers of the Telephony Server to be used in the
system including MG(BRI).
Function
Registration
TP ⇔ SP
Note 1
iLP-PM
SP Internal
Control Port iLP-PM
Note 2
MG(BRI)
SIP
⇔ SP
Ready
H.245
Negotiation
H.245
The packet between TP and SP ("TP ⇔ SP" in the table) does not flow over the network because both of
Note 1:
which are part of the Telephony Server.
The packet related to SP internal control port does not flow over the network.
Note 2:
5. Available Channels
See VoIP Encryption [V-27] in Data Programming Manual - Business for the number of available channels
on the encryption status of this component.
TP side
LAN Port Port Number
(default) (default)
LAN1 3456
LAN1 60130
- -
- -
- -
- -
VOL.2-799
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Command to Port Number
Change Setting (default)
ADTM
22000
(Port Number only)
ADTM
64105
(Port Number only)
64010
-
22001
-
- 22002
- 22003 ~ 26000
SP side
Command to
Change Setting
Cannot be changed
ALIDL
ALIDL
ASPC
5060 Cannot be changed
ASPC
ASPC