NEC Univerge sv8500 Manual page 1036

16. SHOW WARNING_TONE_CONTROL: Displays the current setting of warning tone when LAN failure.
Displays the current setting of warning tone when LAN failure.
MG-BRI>show waring_tone_control
Warning Tone Control of IP Network is 3 (IP & ISDN side).
• The following commands are available for MG-BRI with the firmware version: SP-3709 BRI MG BSC
PROG-A Issue 18 or later.
1. SHOW CALL_HOLD
Displays the current setting of MG Based Call Retention.
MG-BRI> SHOW CALL_HOLD P1
CALL HOLD is DISABLE
2. SHOW RTP_STOP_DETECT
Displays the current setting of Receive Stop Detect timer.
MG-BRI> SHOW RTP_STOP_DETECT
RTP Stop Detect Timer is 3 sec.
:Displays
the current setting of MG Based Call Retention.
: Displays the current setting of Receive Stop Detect timer.
VOL.2-783
MG-BRI