Config Snmp Engineid; Show Snmp Engineid - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Success.
DGS-3620-28PC:admin#
99-12

config snmp engineID

Description
This command is used to configure an identifier for the SNMP engine on the switch. Associated
with each SNMP entity is a unique engine ID.
Format
config snmp engineID <snmp_engineID 10-64>
Parameters
<snmp_engineID 10-64> - Enter the identify for the SNMP engine on the switch.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure an identifier for the SNMP engine on the switch:
DGS-3620-28PC:admin#config snmp engineID 1023457890
Command: config snmp engineID 1023457890
Success.
DGS-3620-28PC:admin#
99-13

show snmp engineID

Description
This command is used to display the identification of the SNMP engine on the switch.
Format
show snmp engineID
Parameters
None.
Restrictions
None.
1100