Show Qinq Ports - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
90-6 show qinq inner_tpid
Description
This command is used to display the inner TPID of the system.
Format
show qinq inner_tpid
Parameters
None.
Restrictions
None.
Example
To display the inner TPID of the system:
DGS-3620-28PC:admin#show qinq inner_tpid
Command: show qinq inner_tpid
Inner TPID: 0x8100
DGS-3620-28PC:admin#
90-7

show qinq ports

Description
This command is used to display the Q-in-Q configuration of ports.
Format
show qinq ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a range of ports to be displayed.
Note: If no parameter specified, the system will display port information for all ports.
Restrictions
None.
1038