Chapter 97 Sflow Commands - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 97
enable sflow
disable sflow
show sflow
create sflow analyzer_server <value 1-4> owner<name 16> {timeout [<sec 1-2000000> | infinite]
| collectoraddress [<ipaddr> | <ipv6addr>] | collectorport <udp_port_number 1-65535> |
maxdatagramsize <value 300-1400>}
config sflow analyzer_server <value 1-4> {timeout [<sec 1-2000000> | infinite] | collectoraddress
[<ipaddr> | <ipv6addr>] | collectorport <udp_port_number 1-65535> | maxdatagramsize
<value 300-1400>}(1)
delete sflow analyzer_server <value 1-4>
show sflow analyzer_server
create sflow flow_sampler ports [<portlist> | all] analyzer_server_id <value 1-4> {rate <value 0-
65535> | tx_rate <value 0-65535> | maxheadersize <value 18-256>}
config sflow flow_sampler ports [<portlist> | all] {rate <value 0-65535> | tx_rate <value 0-
65535> | maxheadersize <value 18-256>}(1)
delete sflow flow_sampler ports [<portlist> | all]
show sflow flow_sampler
create sflow counter_poller ports [<portlist> | all] analyzer_server_id <value 1-4> {interval
[disable | <sec 20-120>]}
config sflow counter_poller ports [<portlist> | all] interval [disable | <sec 20-120>]
delete sflow counter_poller ports [<portlist> | all]
show sflow counter_poller
97-1 enable sflow
Description
This command is used to enable the sFlow function.
Format
enable sflow
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the sFlow function:
DGS-3620-28PC:admin#enable sflow
Command: enable sflow
sFlow Commands
1071