Table of Contents
Advertisement
REP 10.17 Roller Nip P
Parts List on
PL 10.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1.
Remove the exit paper path,
REP
10.20.
2.
Remove the belt and pulley,
Figure
1
Remove the e-clip, gear and drive belt.
Figure 1 Belt and pulley removal
ColorQube® 9303 Family
WARNING
GP
14. Disconnect the power cord
WARNING
1.
3.
Remove roller nip P,
Figure
1
Remove the e-clip and bearing.
Replacement
Replacement is the reverse of the removal procedure.
February 2013
4-87
2.
2
Remove the roller nip P.
Figure 2 Roller nip removal
Repairs/Adjustments
REP 10.17
Advertisement
Chapters
Table of Contents
