D-Link xStack DES-6500 Cli Manual page 75

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
clear counters
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the counters:
clear log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the log information:
D E S - 6 5 0 0 : 4 # c l e a r l o g
C o m m a n d : c l e a r l o g
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to clear the Switch's statistics counters.
clear counters {ports <portlist>}
This command will clear the counters used by the Switch to compile
statistics.
ports <portlist>  Specifies a range of ports to be displayed. The
port list is specified by listing the lowest line card number and the
beginning port number on that line card, separated by a colon. Then
the highest line card number, and the highest port number of the
range (also separated by a colon) are specified. The beginning and
end of the port list range are separated by a dash. For example, 1:3
specifies line card number 1, port 3. 2:4 specifies line card number
2, port 4. 1:3-2:4 specifies all of the ports between line card 1, port 3
and line card 2, port 4  in numerical order.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # c l e a r c o u n t e r s p o r t s 2 : 7 - 2 : 9
C o m m a n d : c l e a r c o u n t e r s p o r t s 2 : 7 - 2 : 9
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to clear the Switch's history log.
clear log
This command will clear the Switch's history log.
None.
Only Administrator-level users can issue this command.
71