D-Link xStack DES-6500 Cli Manual page 22

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To configure the baud rate:
enable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable pausing of the screen display when the command output reaches the end of the page:
disable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable pausing of the screen display when the command output reaches the end of the page:
D E S - 6 5 0 0 : 4 # c o n f i g s e r i a l _ p o r t b a u d _ r a t e 1 1 5 2 0 0
C o m m a n d : c o n f i g s e r i a l _ p o r t b a u d _ r a t e 1 1 5 2 0 0
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to pause the scrolling of the console screen when a command
displays more than one page.
enable clipaging
This command is used when issuing a command which causes the
console screen to rapidly scroll through several pages. This command
will cause the console to pause at the end of each page. The default
setting is enable.
None.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # e n a b l e c l i p a g i n g
C o m m a n d : e n a b l e c l i p a g i n g
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to disable the pausing of the console screen scrolling at the end
of each page when the command displays more than one screen of
information.
disable clipaging
This command is used to disable the pausing of the console screen at
the end of each page when the command displays more than one
screen of information.
None.
Only Administrator-level users can issue this command.
18