D-Link xStack DES-6500 Cli Manual page 57

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To turn on SNMP authentication trap support:
D E S - 6 5 0 0 : 4 # e n a b l e s n m p a u t h e n t i c a t e _ t r a p s
C o m m a n d : e n a b l e s n m p a u t h e n t i c a t e _ t r a p s
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
D E S - 6 5 0 0 : 4 # s h o w s n m p t r a p s
C o m m a n d : s h o w s n m p t r a p s
S N M P T r a p s
A u t h e n t i c a t e T r a p s
DES-6500:4#
disable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To prevent SNMP traps from being sent from the Switch:
D E S - 6 5 0 0 : 4 # d i s a b l e s n m p t r a p s
C o m m a n d : d i s a b l e s n m p t r a p s
S u c c e s s .
Used to show SNMP trap support on the Switch .
show snmp traps
This command is used to view the SNMP trap support status currently
configured on the Switch.
None.
Only Administrator-level users can issue this command.
: E n a b l e d
: E n a b l e d
Used to disable SNMP trap support on the Switch.
disable snmp traps
This command is used to disable SNMP trap support on the Switch.
None.
Only Administrator-level users can issue this command.
53