D-Link xStack DES-6500 Cli Manual page 326

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#config pim last_hop_spt_threshold 0
Command: config pim last_hop_spt_threshold 0
Success.
DES-6500:4#
show pim rpset
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To view the RP Set information:
DES-6500:4# show pim rpset
Command: show pim rpset
PIM RP-Set Table
Bootstrap Router: 12.43.51.81
Group Address
-------------------
224.0.0.0/4
Total Entries: 1
DES-6500:4#
show pim crp
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To view the CRP settings:
DES-6500:4#show pim crp
Used to display the RP Set of the Switch.
show pim rpset
This command will display the information regarding the RP Set learned
by the BSR. This command is for PIM-SM configurations only.
None.
None.
RP Address
--------------
31.43.51.81
Used to display the Candidate RP settings on the Switch, along with
CRP parameters configured for the Switch.
show pim crp
This command will display the settings for Candidate RPs that are
accessible to the switch. This command is for PIM-SM configurations
only.
None.
Only Administrator-level users can issue this command.
Holdtime
----------- ----------------
150
322
Expired Time
107
Type
-----------
Dynamic