D-Link xStack DES-6500 Cli Manual page 329

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4# show pim cbsr
Command: show pim cbsr
PIM Candidate-BSR Table
C-BSR Hash Mask Len
C-BSR Bootstrap Period
Interface
------------ ------------------ -------------
System
Total Entries: 1
show pim
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To view the PIM settings:
: 30
: 60
IP Address
10.90.90.90/8
Used to display the PIM settings, along with PIM parameters configured
for the Switch.
show pim {ipif <ipif_name12>}
This command will display the settings for the PIM function that are
accessible to the switch.
<ipif_name 12> - Enter the name of the IP address for which to display
settings. Entering no name will display all PIM IP interfaces.
None.
Priority
-1 (disabled)
325