D-Link xStack DES-6500 Cli Manual page 207

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an 802.1x user:
D E S - 6 5 0 0 : 4 # c r e a t e 8 0 2 . 1 x u s e r d t r e m b l e t t
C o m m a n d : c r e a t e 8 0 2 . 1 x u s e r d t r e m b l e t t
E n t e r a c a s e - s e n s i t i v e n e w p a s s w o r d : * * * * * *
E n t e r t h e n e w p a s s w o r d a g a i n f o r
c o n f i r m a t i o n : * * * * * *
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view 802.1X users currently configured on the Switch:
D E S - 6 5 0 0 : 4 # s h o w 8 0 2 . 1 x u s e r
C o m m a n d : s h o w 8 0 2 . 1 x u s e r
C u r r e n t A c c o u n t s :
U s e r n a m e
- - - - - - - - - - - - - -
D a r r e n
Used to create a new 802.1x user.
create 802.1x user <username 15>
The create 802.1x user command is used to create new 802.1x
users.
<username 15>  A username of up to 15 alphanumeric characters
in length.
Only Administrator-level users can issue this command.
Used to display the 802.1x user accounts on the Switch.
show 802.1x user
The show 802.1x user command is used to display the 802.1x Port-
based or MAC-based Network Access control local users currently
configured on the Switch.
None.
None.
P a s s w o r d
- - - - - - - - - - - - - -
T r i n i t y
203