D-Link xStack DES-6500 Cli Manual page 121

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config 802.1p user_priority
Parameters
Restrictions
Example usage:
To configure 802.1 user priority on the Switch:
D E S - 6 5 0 0 : 4 # c o n f i g 8 0 2 . 1 p u s e r _ p r i o r i t y 1 3
C o m m a n d : c o n f i g 8 0 2 . 1 p u s e r _ p r i o r i t y 1 3
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show 802.1p user_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show 802.1p user priority:
D E S - 6 5 0 0 : 4 # s h o w 8 0 2 . 1 p u s e r _ p r i o r i t y
C o m m a n d : s h o w 8 0 2 . 1 p u s e r _ p r i o r i t y
C O S C l a s s o f T r a f f i c
P r i o r i t y - 0
Value Priority Queue
--------- ------------------
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 6
<priority 0-7>  Specifies which of the eight 802.1p priority tags (0
through 7) to map to one of the Switch's hardware priority classes of
service (<class_id>, 0 through 6).
<class_id 0-6>  Specifies to which of the Switch's hardware priority
classes of service the 802.1p priority tags (specified above) will be
mapped.
Only Administrator-level users can issue this command.
Used to display the current 802.1p user priority tags to hardware
priority class of service mapping in use by the Switch.
show 802.1p user_priority
The show 802.1p user_priority command will display the current
802.1p user priority tags to hardware priority classes of service
mapping in use by the Switch.
None.
None.
- > < C l a s s - 2 >
117