D-Link xStack DES-6500 Cli Manual page 333

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#delete pim register_checksum_include_data rp_address
11.1.1.1
Command: delete pim register_checksum_include_data rp_address
11.1.1.1
Success.
DES-6500:4#
show pim register_checksum_include_data_rp_list
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To show the RPs that the Switch will send Register packets to and create checksums to be included with the data in
Registered packets:
DES-6500:4# show pim register_checksum_include_data_rp_list
Command: show pim register_checksum_include_data_rp_list
RP Address
-------------------------------------------
11.1.1.1
Total Entries: 1
DES-6500:4#
Used to display RPs that the Switch will send Register packets to and
create checksums to be included with the data in Registered packets.
show pim register_checksum_include_data_rp_list
This command will display RPs that the Switch will send Register
packets to and create checksums to be included with the data in
Registered packets. This command is for PIM-SM configurations only.
None.
Only administrator-level users can use this command.
329