D-Link xStack DES-6500 Cli Manual page 348

show ospf lsdb
Restrictions
Usage example:
To display the link state database of OSPF:
DES-6500:4#show ospf lsdb
Command: show ospf lsdb
Area LSDB
ID Type
--------------- --------- --------------- ------------------ --------
0.0.0.0 RTRLink
0.0.0.0 Summary
1.0.0.0 RTRLink
1.0.0.0 Summary
1.0.0.0 Summary
* ASExtLink
Total Entries: 5
DES-6500:4#
show ospf neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the current OSPF neighbor router table:
DES-6500:4#show ospf neighbor
Command: show ospf neighbor
IP Address of
Neighbor
--------------- --------------- -------- -------------
10.48.74.122
Total Entries: 1
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
link.
None.
NOTE: When this command displays a "
LSDB table for the area_id or the Cost, this is interpreted as "no area ID"
for external LSAs, and as "no cost given" for the advertised link.
Advertising
Router ID
50.48.75.73
50.48.75.73
50.48.75.73
50.48.75.73
50.48.75.73
50.48.75.73
Used to display the current OSPF neighbor router table.
show ospf neighbor {<ipaddr>}
This command will display the current OSPF neighbor router table.
<ipaddr>  The IP address of the neighbor router.
None.
Router ID of
Neighbor
10.2.2.2
*
" (a star symbol) in the OSPF
Link State
ID
50.48.75.73
10.0.0.0/8
50.48.75.73
40.0.0.0/8
50.0.0.0/8
1.2.0.0/16
Neighbor Neighbor
Priority State
1 Initial
344
Cost Sequence
Number
---------
* 0x80000002
1 0x80000001
* 0x80000001
1 0x80000001
1 0x80000001
20 0x80000001