D-Link xStack DES-6500 Cli Manual page 58

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
D E S - 6 5 0 0 : 4 #
disable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable the SNMP authentication trap support:
config snmp system_contact
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch contact to "
Used to disable SNMP authentication trap support.
disable snmp authenticate_traps
This command is used to disable SNMP authentication support on the
Switch.
None.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # d i s a b l e s n m p a u t h e n t i c a t e _ t r a p s
C o m m a n d : d i s a b l e s n m p a u t h e n t i c a t e _ t r a p s
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to enter the name of a contact person who is responsible for the
Switch.
config snmp system_contact <sw_contact>
The config snmp system_contact command is used to enter the
name and/or other information to identify a contact person who is
responsible for the Switch. A maximum of 255 character can be used.
<sw_contact> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no contact.
Only Administrator-level users can issue this command.
M I S D e p a r t m e n t I I
":
54