D-Link xStack DES-6500 Cli Manual page 184

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the server group "group_1":
D E S - 6 5 0 0 : 4 # c r e a t e a u t h e n s e r v e r _ g r o u p g r o u p _ 1
C o m m a n d : c r e a t e a u t h e n s e r v e r _ g r o u p g r o u p _ 1
S u c c e s s .
D E S - 6 5 0 0 : 4 #
config authen server_group
Purpose
Syntax
Description
Parameters
Used to create a user-defined authentication server group.
create authen server_group <string 15>
This command will create an authentication server group. A server
group is a technique used to group TACACS/XTACACS/TACACS+
and RADIUS server hosts into user defined categories for
authentication using method lists. The user may add up to eight (8)
authentication server hosts to this group using the config authen
server_group command.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the newly created server group.
Only Administrator-level users can issue this command.
Used to configure a user-defined authentication server group.
config authen server_group [tacacs | xtacacs | tacacs+ | radius |
<string 15>] [add | delete] server_host <ipaddr> protocol
[tacacs | xtacacs | tacacs+ | radius]
This command will configure an authentication server group. A
server group is a technique used to group
TACACS/XTACACS/TACACS+ and RADIUS server hosts into user
defined categories for authentication using method lists. The user
may define the type of server group by protocol or by previously
defined server group. Up to eight (8) authentication server hosts
may be added to any particular group.
server_group - The user may define the group by protocol groups
built into the Switch (TACACS/XTACACS/TACACS+/RADIUS), or by
a user-defined group previously created using the create authen
server_group command.

tacacs – Use this parameter to utilize the built-in TACACS
server protocol on the Switch. Only server hosts utilizing
the TACACS protocol may be added to this group.

xtacacs – Use this parameter to utilize the built-in
XTACACS server protocol on the Switch. Only server hosts
utilizing the XTACACS protocol may be added to this group.

tacacs+ – Use this parameter to utilize the built-in
TACACS+ server protocol on the Switch. Only server hosts
180