D-Link xStack DES-6500 Cli Manual page 328

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#config pim cbsr ipif Trinity priority 4
Command: config pim cbsr ipif Trinity priority 4
Success.
DES-6500:4#
Usage example:
To configure the hash mask length for the CBSR:
DES-6500:4#config pim cbsr hash_masklen 30
Command: config pim cbsr hash_masklen 30
Success.
DES-6500:4#
Usage example:
To configure the bootstrap period for the CBSR:
DES-6500:4#config pim cbsr bootstrap_period 60
Command: config pim cbsr bootstrap_period 60
Success.
DES-6500:4#
show pim cbsr
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To view the CBSR settings:
Used to display the Candidate BSR settings of the switch, along with
CBSR parameters configured for the Switch.
show pim cbsr {ipif <ipif_name12>}
This command will display the settings for Candidate BSRs that are
accessible to the switch. This command is for PIM-SM configurations
only.
<ipif_name 12> - Enter the name of the IP interface for which to
display settings. Entering no name will display all CBSRs.
None.
324