D-Link xStack DES-6500 Cli Manual page 151

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
disable ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the IP interface named "s2":
D E S - 6 5 0 0 : 4 # d i s a b l e i p i f s 2
C o m m a n d : d i s a b l e i p i f s 2
S u c c e s s .
D E S - 6 5 0 0 : 4 #
delete ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the IP interface named s2:
D E S - 6 5 0 0 : 4 # d e l e t e i p i f s 2
C o m m a n d : d e l e t e i p i f s 2
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to disable the configuration of an IP interface on the Switch.
disable ipif [<ipif_name 12> | all]
This command will disable an IP interface on the Switch, without altering
its configuration values.
<ipif_name 12>  The name previously created to define the IP
interface.
all – Entering this parameter will disable all the IP interfaces currently
configured on the Switch.
None.
Used to delete the configuration of an IP interface on the Switch.
delete ipif [<ipif_name 12> | all]
This command will delete the configuration of an IP interface on the
Switch.
<ipif_name 12>  The name of the IP interface to delete.
all – Entering this parameter will delete all the IP interfaces currently
configured on the Switch.
None.
147