D-Link xStack DES-6500 Cli Manual page 219

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To delete previously configured RADIUS server communication settings:
D E S - 6 5 0 0 : 4 # c o n f i g r a d i u s d e l e t e 1
C o m m a n d : c o n f i g r a d i u s d e l e t e 1
S u c c e s s .
D E S - 6 5 0 0 : 4 #
config radius
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the RADIUS settings:
D E S - 6 5 0 0 : 4 # c o n f i g r a d i u s 1 i p a d d r e s s 1 0 . 4 8 . 7 4 . 1 2 1
k e y d l i n k
C o m m a n d : c o n f i g r a d i u s 1 i p a d d r e s s 1 0 . 4 8 . 7 4 . 1 2 1
k e y d l i n k
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to configure the Switch's RADIUS settings.
config radius <server_index 1-3> {ipaddress <server_ip> | key
<passwd 32> | auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}
The config radius command is used to configure the Switch's RADIUS
settings.
<server_index 1-3>  Assigns a number to the current set of RADIUS
server settings. Up to 3 groups of RADIUS server settings can be
entered on the Switch.
ipaddress <server_ip>  The IP address of the RADIUS server.
key  Specifies that a password and encryption key will be used
between the Switch and the RADIUS server.
 <passwd 32>  The shared-secret key used by the RADIUS
server and the Switch. Up to 32 characters can be used.
auth_port <udp_port_number>  The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number>  The UDP port number for accounting
requests. The default is 1813.
Only Administrator-level users can issue this command.
215