D-Link xStack DES-6500 Cli Manual page 178

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
d e f a u l t
T o t a l E n t r i e s : 2
D E S - 6 5 0 0 : 4 #
config authen application
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the default method list for the web interface:
D E S - 6 5 0 0 : 4 # c o n f i g a u t h e n a p p l i c a t i o n h t t p l o g i n
d e f a u l t
C o m m a n d : c o n f i g a u t h e n a p p l i c a t i o n h t t p l o g i n
1 t a c a c s +
2 l o c a l
Used to configure various applications on the Switch for
authentication using a previously configured method list.
config authen application [console | telnet | ssh | http | all]
[login | enable] [default | method_list_name <string 15>]
This command is used to configure switch configuration applications
(console, telnet, ssh, web) for login at the user level and at the
administration level (authen_enable) utilizing a previously configured
method list.
application – Choose the application to configure. The user may
choose one of the following four applications to configure.

console – Choose this parameter to configure the
command line interface login method.

telnet – Choose this parameter to configure the telnet login
method.

ssh - Choose this parameter to configure the SSH (Secure
Shell) login method.

http – Choose this parameter to configure the web interface
login method.

all – Choose this parameter to configure all applications
(console, telnet, web, ssh) login method.
login – Use this parameter to configure an application for normal
login on the user level, using a previously configured method list.
enable - Use this parameter to configure an application for
upgrading a normal user level to administrator privileges, using a
previously configured method list.
default – Use this parameter to configure an application for user
authentication using the default method list.
method_list_name <string 15> – Use this parameter to configure an
application for user authentication using a previously configured
method list. Enter a alphanumeric string of up to 15 characters to
define a previously configured method list.
Only Administrator-level users can issue this command.
174
B u i l t - i n G r o u p
K e y w o r d