D-Link xStack DES-6500 Cli Manual page 192

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
enable ssh
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To enable SSH:
disable ssh
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To disable SSH:
config ssh authmode
Purpose
Syntax
Description
Used to enable SSH.
enable ssh
This command is used to enable SSH on the Switch.
None.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # e n a b l e s s h
C o m m a n d : e n a b l e s s h
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to disable SSH.
disable ssh
This command is used to disable SSH on the Switch.
None.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # d i s a b l e s s h
C o m m a n d : d i s a b l e s s h
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to configure the SSH authentication mode setting.
config ssh authmode [password | publickey | hostbased]
[enable | disable]
This command will allow users to configure the SSH authentication
mode for users attempting to access the Switch.
188