D-Link xStack DES-6500 Cli Manual page 171

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config authen_login
Restrictions
Example usage:
To configure the user defined method list "Trinity" with authentication methods TACACS, XTACACS and local, in
that order.
D E S - 6 5 0 0 : 4 # c o n f i g a u t h e n _ l o g i n m e t h o d _ l i s t _ n a m e T r i n i t y m e t h o d
t a c a c s x t a c a c s l o c a l
C o m m a n d : c o n f i g a u t h e n _ l o g i n m e t h o d _ l i s t _ n a m e T r i n i t y m e t h o d
t a c a c s x t a c a c s l o c a l
server listed in the server group list.

server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server
group previously configured on the Switch.

local - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch.

none – Adding this parameter will require no authentication
to access the Switch.
method_list_name – Enter a previously implemented method list
name defined by the user. The user may add one, or a combination of
up to four (4) of the following authentication methods to this method
list:

tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.

xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from a remote
XTACACS server.

tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.

radius - Adding this parameter will require the user to be
authenticated using the RADIUS protocol from a previously
configured RADIUS server.

server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server
group previously configured on the Switch.

local - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch.

none – Adding this parameter will require no authentication
to access the Switch.
NOTE:
protocol will override any other authentication that
follows it on a method list or on the default method
list.
Only Administrator-level users can issue this command.
167
Entering none or local as an authentication