D-Link xStack DES-6500 Cli Manual page 26

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
reset
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
login
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To initiate the login procedure:
Used to reset the Switch to the factory default settings.
reset {[config | system]}
This command is used to restore the Switch's configuration to the
default settings assigned from the factory.
config  If the keyword 'config' is specified, all of the factory default
settings are restored on the Switch including the IP address, user
accounts, and the Switch history log. The Switch will not save or reboot.
system  If the keyword 'system' is specified all of the factory default
settings are restored on the Switch. The Switch will save and reboot
after the settings are changed to default. Rebooting will clear all entries
in the Forwarding Data Base.
If no parameter is specified, the Switch's current IP address, user
accounts, and the Switch history log are not changed. All other
parameters are restored to the factory default settings. The Switch will
not save or reboot.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # r e s e t c o n f i g
C o m m a n d : r e s e t c o n f i g
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to log in a user to the Switch's console.
login
This command is used to initiate the login procedure. The user will be
prompted for his Username and Password.
None.
None.
D E S - 6 5 0 0 : 4 # l o g i n
C o m m a n d : l o g i n
U s e r N a m e :
22