D-Link xStack DES-6500 Cli Manual page 186

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To delete the server group "group_1":
D E S - 6 5 0 0 : 4 # d e l e t e s e r v e r _ g r o u p g r o u p _ 1
C o m m a n d : d e l e t e s e r v e r _ g r o u p g r o u p _ 1
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the authen server groups located on the Switch:
D E S - 6 5 0 0 : 4 # s h o w a u t h e n s e r v e r _ g r o u p
C o m m a n d : s h o w a u t h e n s e r v e r _ g r o u p
G r o u p N a m e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
r a d i u s
D a r r e n
T A C A C S
t a c a c s
T A C A C S
t a c a c s +
x t a c a c s
T o t a l E n t r i e s : 4
D E S - 6 5 0 0 : 4 #
Used to view authentication server groups on the Switch.
show authen server_group {<string 15>}
This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to view.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
I P A d d r e s s
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 0 . 5 3 . 1 3 . 2
1 0 . 5 3 . 1 3 . 9 4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
P r o t o c o l
- - - - - - - -
182