D-Link xStack DES-6500 Cli Manual page 103

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create multicast MAC forwarding:
D E S - 6 5 0 0 : 4 # c r e a t e m u l t i c a s t _ f d b d e f a u l t 0 1 - 0 0 - 0 0 -
0 0 - 0 0 - 0 1
C o m m a n d : c r e a t e m u l t i c a s t _ f d b d e f a u l t 0 1 - 0 0 - 0 0 -
0 0 - 0 0 - 0 1
S u c c e s s .
D E S - 6 5 0 0 : 4 #
config multicast_fdb
Purpose
Syntax
Description
Parameters
D E S - 6 5 0 0 : 4 # c r e a t e f d b d e f a u l t 0 0 - 0 0 - 0 0 - 0 0 - 0 1 - 0 2
p o r t 2 : 5
C o m m a n d : c r e a t e f d b d e f a u l t 0 0 - 0 0 - 0 0 - 0 0 - 0 1 - 0 2
p o r t 2 : 5
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to create a static entry to the multicast MAC address forwarding
table (database)
create multicast_fdb <vlan_name 32> <macaddr>
This command will make an entry into the Switch's multicast MAC
address forwarding database.
<vlan_name 32>  The name of the VLAN on which the MAC address
resides.
<macaddr>  The MAC address that will be added to the forwarding
table.
Only Administrator-level users can issue this command.
Used to configure the Switch's multicast MAC address forwarding
database.
config multicast_fdb <vlan_name 32> <macaddr> [add | delete]
<portlist>
This command configures the multicast MAC address forwarding table.
<vlan_name 32>  The name of the VLAN on which the MAC address
resides.
<macaddr>  The MAC address that will be configured in the multicast
forwarding table.
99