D-Link xStack DES-6500 Cli Manual page 212

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
C T R L + C E S C q Q u i t S P A C E n N e x t P a g e E n t e r N e x t E n t r y a A l l
config 802.1x auth_mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure 802.1x authentication by MAC address:
D E S - 6 5 0 0 : 4 # c o n f i g 8 0 2 . 1 x a u t h _ m o d e m a c _ b a s e d
C o m m a n d : c o n f i g 8 0 2 . 1 x a u t h _ m o d e m a c _ b a s e d
S u c c e s s .
D E S - 6 5 0 0 : 4 #
config 802.1x capability ports
Purpose
Syntax
Used to configure the 802.1x authentication mode on the Switch.
config 802.1x auth_mode [port_based | mac_based]
The config 802.1x auth_mode command is used to enable either
the port-based or MAC-based 802.1x authentication feature on the
Switch.
[port_based | mac_based ports]  The Switch may authenticate
802.1x by either port or MAC address.
Only Administrator-level users can issue this command.
Used to configure the 802.1x capability of a range of ports on the
Switch.
config 802.1x capability ports [<portlist> | all] [authenticator |
208