D-Link xStack DES-6500 Cli Manual page 279

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To display an entry in the ARP table:
DES-6500:4#show arpentry ipaddress 10.1.1.169
Command: show arpentry ipaddress 10.1.1.169
ARP Aging Time : 30
Interface
-------------
System
Total Entries = 1
DES-6500:4#
clear arptable
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove dynamic entries in the ARP table:
DES-6500:4#clear arptable
Command: clear arptable
Success.
DES-6500:4#
IP Address
---------------
10.1.1.169
Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from the
Switch's ARP table. Static ARP table entries are not affected.
None.
Only Administrator-level users can issue this command.
MAC Address
-----------------
00-50-BA-70-E4-4E
275
Type
--------
Dynamic