D-Link xStack DES-6500 Cli Manual page 48

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
D E S - 6 5 0 0 : 4 # s h o w s n m p e n g i n e I D
C o m m a n d : s h o w s n m p e n g i n e I D
S N M P E n g i n e I D : 0 0 3 5 6 3 6 6 6 6
D E S - 6 5 0 0 : 4 #
create snmp group
Purpose
Syntax
Description
Parameters
Used to display the identification of the SNMP engine on the Switch.
show snmp engineID
The show snmp engineID command displays the identification of the
SNMP engine on the Switch.
None.
None.
Used to create a new SNMP group, or a table that maps SNMP users to
SNMP views.
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv |
auth_nopriv | auth_priv]] {read_view <view_name 32> | write_view
<view_name 32> | notify_view <view_name 32>}
The create snmp group command creates a new SNMP group, or a
table that maps SNMP users to SNMP views.
<groupname 32>  An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated with.
v1 – Specifies that SNMP version 1 will be used. The Simple Network
Management Protocol (SNMP), version 1, is a network management
protocol that provides a means to monitor and control network devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 will be used. SNMP v3 provides
secure access to devices through a combination of authentication and
encrypting packets over the network. SNMP v3 adds:
 Message integrity  Ensures that packets have not been
tampered with during transit.
44