D-Link xStack DES-6500 Cli Manual page 47

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
D E S - 6 5 0 0 : 4 # s h o w s n m p c o m m u n i t y
C o m m a n d : s h o w s n m p c o m m u n i t y
S N M P C o m m u n i t y T a b l e
C o m m u n i t y N a m e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
d l i n k
p r i v a t e
p u b l i c
T o t a l E n t r i e s : 3
D E S - 6 5 0 0 : 4 #
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666"
D E S - 6 5 0 0 : 4 # c o n f i g s n m p e n g i n e I D 0 0 3 5 6 3 6 6 6 6
C o m m a n d : c o n f i g s n m p e n g i n e I D 0 0 3 5 6 3 6 6 6 6
Used to display SNMP community strings configured on the Switch.
show snmp community {<community_string 32>}
The show snmp community command is used to display SNMP
community strings that are configured on the Switch.
<community_string 32>  An alphanumeric string of up to 32 characters
that is used to identify members of an SNMP community. This string is
used like a password to give remote SNMP managers access to MIB
objects in the Switch's SNMP agent.
None.
V i e w N a m e
R e a d V i e w
C o m m u n i t y V i e w
C o m m u n i t y V i e w
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID>
The config snmp engineID command configures a name for the SNMP
engine on the Switch.
<snmp_engineID>  An alphanumeric string that will be used to identify
the SNMP engine on the Switch.
Only Administrator-level users can issue this command.
A c c e s s R i g h t
r e a d _ w r i t e
r e a d _ w r i t e
r e a d _ o n l y
43