D-Link xStack DES-6500 Cli Manual page 343

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show ospf area
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display an OSPF area's settings:
DES-6500:4#show ospf area
Command: show ospf area
Area ID
--------------- ------ ----------------------- -----------------
0.0.0.0
Total Entries : 1
DES-6500:4#
create ospf host_route
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To configure the OSPF host route settings:
DES-6500:4#create ospf host_route 10.48.74.122 area
10.1.1.1 metric 2
Command: create ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
Success.
Used to display an OSPF area's configuration.
show ospf area {<area_id>}
This command will display the current OSPF area configuration.
<area_id>  A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
None.
Type Stub Import Summary LSA Stub Default Cost
Normal None
Used to configure OSPF host route settings.
create ospf host_route <ipaddr> {area <area_id> | metric <value 1-
65535>}
This command is used to configure the OSPF host route settings.
<ipaddr>  The host's IP address.
<area_id>  A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
metric <value 1-65535>  A metric between 1 and 65535, which will be
advertised.
Only Administrator-level users can issue this command.
None
339