D-Link xStack DES-6500 Cli Manual page 314

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To display DVMRP neighbor table:
DES-6500:4#show dvmrp neighbor
Command: show dvmrp neighbor
DVMRP Neighbor Address Table
Interface
-------------- ------------------
System
Total Entries: 1
DES-6500:4#
show dvmrp nexthop
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DVMRP routing next hop table:
DES-6500:4#show dvmrp nexthop
Command: show dvmrp nexthop
Source IP Address/Netmask
-----------------
10.0.0.0/8
10.0.0.0/8
20.0.0.0/8
20.0.0.0/8
30.0.0.0/8
30.0.0.0/8
Total Entries: 6
DES-6500:4#
show dvmrp
Purpose
Neighbor Address
10.2.1.123
Used to display the current DVMRP routing next hop table.
show dvmrp nexthop {ipaddress <network_address> | ipif
<ipif_name 12>}
This command will display the DVMRP routing next hop table.
<ipif_name 12>  The name of the IP interface for which to display the
current DVMRP routing next hop table.
ipaddress <network_address>  The IP address and netmask of the
destination. The address and mask information can be specified using
the traditional format (for example, 10.1.2.3/255.0.0.0) or in CIDR
format, 10.1.2.3/8.
None.
Interface Name
---------------
Used to display the current DVMRP settings on the Switch.
Generation ID
---------------
2
Type
------
ip2 Leaf
ip3 Leaf
System Leaf
ip3 Leaf
System Leaf
ip2 Leaf
310
Expire Time
---------
250