D-Link xStack DES-6500 Cli Manual page 271

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To configure SNTP settings:
DES-6500:4#config sntp primary 10.1.1.1 secondary 10.1.1.2
poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 30
Success.
DES-6500:4#
show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DES-6500:4#show sntp
Command: show sntp
Current Time Source
SNTP : Disabled
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DES-6500:4#
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
DES-6500:4#enable sntp
Command: enable sntp
Success.
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the
source IP address, time and poll interval.
None.
Only Administrator-level users can issue this command.
: System Clock
: 10.1.1.1
: 720 sec
Enables SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately
configured (see config sntp). Enabling and configuring SNTP
support will override any manually configured system time
settings.
None.
Only Administrator-level users can issue this command. SNTP
settings must be configured for SNTP to function (config sntp).
267