D-Link xStack DES-6500 Cli Manual page 260

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
enable sim
Parameters
Restrictions
Example usage:
To enable SIM on the Switch:
D E S - 6 5 0 0 : 4 # e n a b l e s i m
C o m m a n d : e n a b l e s i m
S u c c e s s .
D E S - 6 5 0 0 : 4 #
disable sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SIM on the Switch:
show sim
Purpose
Syntax
Description
None.
Only Administrator-level users can issue this command.
Used to disable Single IP Management (SIM) on the Switch.
disable sim
This command will disable SIM globally on the Switch.
None.
Only Administrator-level users can issue this command.
D E S - 6 5 0 0 : 4 # d i s a b l e s i m
C o m m a n d : d i s a b l e s i m
S u c c e s s .
D E S - 6 5 0 0 : 4 #
Used to view the current information regarding the SIM group on the
Switch.
show sim {[candidates {<candidate_id 1-100>} | members
{<member_id 1-32>} | group {commander_mac <macaddr>}
neighbor]}
This command will display the current information regarding the SIM group
on the Switch, including the following:
SIM Version - Displays the current Single IP Management version on the
Switch.
Firmware Version - Displays the current Firmware version on the Switch.
256