D-Link xStack DES-6500 Cli Manual page 179

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
d e f a u l t
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show authen application
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the login and enable method list for all applications on the Switch:
D E S - 6 5 0 0 : 4 # s h o w a u t h e n a p p l i c a t i o n
C o m m a n d : s h o w a u t h e n a p p l i c a t i o n
A p p l i c a t i o n
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C o n s o l e
T e l n e t
S S H
H T T P
D E S - 6 5 0 0 : 4 #
create authen server_host
Purpose
Syntax
Description
Used to display authentication methods for the various applications
on the Switch.
show authen application
This command will display all of the authentication method lists (login,
enable administrator privileges) for switch configuration applications
(console, telnet, SSH, web) currently configured on the Switch.
None.
None.
L o g i n M e t h o d L i s t
d e f a u l t
T r i n i t y
d e f a u l t
d e f a u l t
Used to create an authentication server host.
create authen server_host <ipaddr> protocol [tacacs | xtacacs
| tacacs+ | radius] {port <int 1-65535> | key [<key_string 254> |
none] | timeout <int 1-255> | retransmit < 1-255>}
This command will create an authentication server host for the
TACACS/XTACACS/TACACS+ and RADIUS security protocols on
the Switch. When a user attempts to access the Switch with
authentication protocol enabled, the Switch will send authentication
packets to a remote TACACS/XTACACS/TACACS+ or RADIUS
server host on a remote host. The TACACS/XTACACS/TACACS+
or RADIUS server host will then verify or deny the request and
return the appropriate message to the Switch. More than one
175
E n a b l e M e t h o d L i s t
- - - - - - - - - - - - - - - - - - - -
d e f a u l t
d e f a u l t
d e f a u l t
d e f a u l t