D-Link xStack DES-6500 Cli Manual page 324

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
delete pim static_rp
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To remove the multicast group IP address used in identifying the Rendezvous Point (RP):
DES-6500:4#delete pim static_rp group 231.0.0.1/32
Command: delete pim static_rp group 231.0.0.1/32
Success.
DES-6500:4#
show pim static_rp
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the static RP settings as configured for the multiple access network:
DES-6500:4#show pim static_rp
Command: show pim static_rp
PIM Static RP Table
Group
------------------
224.0.0.0/4
239.0.0.1/32
239.0.0.2/32
239.0.0.3/32
Total entries: 4
To remove the multicast group IP address used in identifying the
Rendezvous Point (RP).
delete pim static_rp group <ip_addr/netmask>
This command will remove the multicast group IP address used in
identifying the Rendezvous Point (RP). This command is for PIM-SM
configurations only.
group <ip_addr/netmask> - Enter the multicast group IP address used
in identifying the Rendezvous Point (RP). This address must be a class
D address.
Only Administrator-level users can issue this command.
To show the Static Rendezvous Point (RP) settings.
show pim static_rp
This command will display the Static Rendezvous Point (RP) settings.
This command is for PIM-SM configurations only.
None.
Only administrator-level users can use this command.
RP Address
---------------------
11.1.1.254
31.1.1.1
31.1.1.12
31.1.1.123
320