D-Link xStack DES-6500 Cli Manual page 139

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
F o r b i d d e n p o r t s :
T o t a l E n t r i e s : 1
D E S - 6 5 0 0 : 4 #
show gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP port status:
Used to display the GVRP status for a port list on the Switch.
show gvrp {<portlist>}
This command displays the GVRP status for a port list on the Switch.
<portlist>  Specifies a range of ports for which the GVRP status is
to be displayed. The port list is specified by listing the lowest line
card number and the beginning port number on that line card,
separated by a colon. Then the highest line card number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated
by a dash. For example, 1:3 specifies line card number 1, port 3. 2:4
specifies line card number 2, port 4. 1:3-2:4 specifies all of the ports
between line card 1, port 3 and line card 2, port 4  in numerical
order.
None.
135