D-Link xStack DES-6500 Cli Manual page 307

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DNS relay status:
DES-6500:4#show dnsr
Command: show dnsr
DNSR Status
Primary Name Server
Secondary Name Server
DNSR Cache Status
DNSR Static Cache Table Status
DNS Relay Static Table
Domain Name
--------------------------------------
www.123.com.tw
bbs.ntu.edu.tw
Total Entries: 2
DES-6500:4#
Used to display the current DNS relay status.
show dnsr {static}
This command is used to display the current DNS relay status.
static  Allows the display of only the static entries into the DNS relay
table. If this parameter is omitted, the entire DNS relay table will be
displayed.
None.
: Disabled
: 0.0.0.0
: 0.0.0.0
: Disabled
: Disabled
IP Address
---------------
10.12.12.123
140.112.1.23
303