D-Link xStack DES-6500 Cli Manual page 306

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#enable dnsr static
Command: enable dnsr static
Success.
DES-6500:4#
disable dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable status of DNS relay.
DES-6500:4#disable dnsr
Command: disable dnsr
Success.
DES-6500:4#
Example usage:
To disable cache lookup for DNS relay.
DES-6500:4#disable dnsr cache
Command: disable dnsr cache
Success.
DES-6500:4#
Example usage:
To disable static table lookup for DNS relay.
DES-6500:4#disable dnsr static
Command: disable dnsr static
Success.
DES-6500:4#
Used to disable DNS relay on the Switch.
disable dnsr {cache | static}
This command is used, in combination with the enable dnsr
command above, to enable and disable DNS Relay on the Switch.
cache – This parameter will allow the user to disable the cache
lookup for the DNS rely on the Switch.
static – This parameter will allow the user to disable the static table
lookup for the DNS rely on the Switch.
Only Administrator-level users can issue this command.
302