D-Link xStack DES-6500 Cli Manual page 152

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings.
D E S - 6 5 0 0 : 4 # s h o w i p i f S y s t e m
C o m m a n d : s h o w i p i f S y s t e m
I P I n t e r f a c e S e t t i n g s
I n t e r f a c e N a m e
S e c o n d a r y
I P A d d r e s s
S u b n e t M a s k
V L A N N a m e
A d m i n . S t a t e
L i n k S t a t u s
M e m b e r P o r t s
T o t a l E n t r i e s : 1
D E S - 6 5 0 0 : 4 #
Used to display the configuration of an IP interface on the Switch.
show ipif {<ipif_name 12>}
This command will display the configuration of an IP interface on the
Switch.
<ipif_name 12>  The name created for the IP interface to be viewed.
None.
: S y s t e m
: F A L S E
: 1 0 . 4 8 . 7 4 . 1 2 2
: 2 5 5 . 0 . 0 . 0
: d e f a u l t
: E n a b l e d
: L i n k U P
: 1 : 1 - 1 : 2 4
NOTE: In the IP Interface Settings table shown above, the Secondary field
will have two displays. FALSE denotes that the IP interface is a primary IP
interface while TRUE denotes a secondary IP interface.
( M A N U A L )
148