D-Link xStack DES-6500 Cli Manual page 15

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an administrator-level user account with the username "dlink".
D E S - 6 5 0 0 : 4 # c r e a t e a c c o u n t a d m i n d l i n k
C o m m a n d : c r e a t e a c c o u n t a d m i n d l i n k
E n t e r a c a s e - s e n s i t i v e n e w p a s s w o r d : * * * *
E n t e r t h e n e w p a s s w o r d a g a i n f o r c o n f i r m a t i o n : * * * *
S u c c e s s .
D E S - 6 5 0 0 : 4 #
config account
Purpose
Syntax
Description
Parameters
Restrictions
Used to create user accounts.
create [admin | user] <username 15>
The create account command is used to create user accounts that
consist of a username of 1 to 15 characters and a password of 0 to
15 characters. Up to 8 user accounts can be created.
admin <username> - Entering this parameter will give the specified
user administrative-level privileges over configuring functions of the
Switch. This user may perform any function listed in this manual. A
username of up to 15 characters must be created with this command
to identify the admin user.
user <username> - Entering this parameter will give the specified
user user-level privileges over configuring functions of the Switch.
User-level privileges limit the execution of many commands listed in
this manual. A username of up to 15 characters must be created with
this command to identify the user.
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Used to configure user accounts.
config account <username>
The config account command configures a user account that has
been created using the create account command.
<username>- Enter the username of the account to be configured.
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
11